Get in Touch
Our highly experienced and friendly staff are here to answer your question and to assist you in selecting the right mobile system for your requirements.
Call us on 01691 900222
Email [email protected]
Nexcom MVS 5603-C8SK 8-CH PoE Mobile NVR increases safety and security for bus passenger transportation with high video resolution and 2 removable extensive storage HDD/SSD capacity. It connects up to 8 IP cameras PoE function providing reliable and high quality video coverage around the bus.
MVS 5603-C8SK is a modular design, it is flexible to use other kinds of expansion boards to extend different I/O functions for different applications.
Nexcom MVS 5603-C8SK leverages wireless networks to simplify fleet management with capabilities such as remote, real-time video monitoring. This remote capability keeps transit fleets in service around the clock.
Vehicle data integration and diagnostics are also carried out via CAN Bus and OBDII. MIL-STD-810G for shock and vibration is designed to operate in harsh environments. Optional internal back-up battery guards Nexcom MVS 5603-C8SK against any unexpected vehicle power failure or unstable vehicle power.
| Specs | Description |
|---|
| CPU |
- Intel® Core™ Dual Core i7-6600U, 2.6GHz
- Intel® Core™ Dual Core i3-6100U, 2.3GHz
|
| Memory |
- 2GB DDR3L SO-DMIM 1600MHz 204-pin (up to 16GB)
|
| Storage |
- 2 x 2.5" SATA 3.0 SSD/HDD (removable)
- 1 x CFast
|
| Expansion |
- 1 x full size Mini-PCIe socket (USB 2.0)
- 1 x full size Mini-PCIe socket (USB 2.0 PCIe)
- 1 x half size Mini-PCIe socket (USB 2.0 PCIe)
|
| GPS & On-Board Sensors |
- 1 x default U-blox NEO-M8N GNSS module for GPS/Gloness/QZSS/Galileo/Beidou
- Optional modules with Dead Reckoning available
- Built-in G-sensor
|
| Power over Ethernet |
- 8-port RJ45 for 10/100/1000 Mbps PoE IEEE 802.3af conformity, total 60W
|
| I/O Ports - Front |
- 6 x LED indicators for power/storage/WLAN/WWAN/Status/Health
- 1 x CFast socket with cover
- 1 x Reset button
- 2 x USB type A USB 3.0 port
- 2 x phone jacks 3.5mm for 1 x Mic-in and 1 x Line-out
- 2 x externally accessible SIM card sockets
- 2 x antenna holes for WWAN/WLAN/BT/GPS
|
| I/O Ports - Rear |
- 8 x RJ45 10/100/1000 Mbps PoE ports with LED
- 2 x RJ45 10/100/1000 Intel® Fast Ethernet with LED
- 1 x 9~36VDC input with ignition and 40W typical power consumption
- 2 x USB type A USB 3.0 port
- 2 x phone jacks 3.5mm for 1 x Mic-in and 1 x Line-out
- 1 x DB-15 VGA, resolution up to 2560 x 1600 @60Hz
- 1 x HDMI port, resolution up to 2560 x 1600 @60Hz
- 2 x DB-9 RS-2321 x DB-9 RS-232/422/485 (RI/5V/12V selectable)
- 1 x 12VDC output (2A) SM Bus 2 x MDI power button1 x DB9 connector for optional DR signal input, 2 x MDO and iButton
- 1 x 16-pin terminal block connector
- 1 x CAN Bus 2.0B (on board)
- 1 x OBDII from optional VIOB-OBD-03 module (SAE J1939)
- 1 x CAN Bus 2.0B from optional VIOB-CAN-03 module
- 8 x programmable GPIO
(4 x Digital inputs, w/ optional 3KV isolation protection)
Input voltage (internal type): 5VDC TTL (default)
Input voltage (source type): 3 ~ 24VDC
(4 x Digital outputs, w/ optional 3KV isolation protection)
Digital output (sink type): 5VDC TTL (default), max current: 20mA
Digital output (source type): 3 ~ 24VDC, max current: 150mA
|
| Power Managment |
- Selectable boot-up & shut-down voltage for low power protection by software. Setting 8-level power on/ off delay time by software. Support S3/S4 suspend mode
- Optional internal 1100mAh, Li-Polymer rechargeable battery
|
| OS |
- Windows 7
- WES7
- Windows 8
- WES8
- Windows 10
- Linux kernel 3.X
|
| Environment |
- Operating temperatures: -30°C~60°C (w/ industrial SSD) with air flow
- Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g
|
| Dimensions |
- 260mm (W) x 196mm (D) x 91mm (H)
- Weight 4 Kg
|
Get in Touch
Our highly experienced and friendly staff are here to answer your question and to assist you in selecting the right mobile system for your requirements.
Call us on 01691 900222
Email [email protected]
There are many rugged computing hardware options available today, it can become overwhelming. RUGGED MOBILE Systems are here to help narrow down those options and ensure you choose the most appropriate hardware and relevant accessories for your users. With in-house technical support, in-vehicle installation expertise, many years of experience in the rugged hardware industry, a bank of demonstration units for trial and a real passion for rugged computing solutions we can help you every step of the way.
Call us today on 01691 900222 for an informal discussion on your requirements.
